VTech InnoTAB 3 User Manual page 29

Clock time is
not accurate or
requests
InnoTab 3
®
to set up time
when turning on
.
InnoTab 3
®
Touch screen is
inaccurate or it is
impossible to select
the correct icon on
the screen.
Inserted a microSD
card (not included),
but the tablet
cannot recognise it.
Files copied
to the tablet's
internal memory
disappeared.
When using the
Rechargeable
Power Pack (sold
separately), the
console suddenly
turns off without
giving a Low Battery
warning.
For more information and troubleshooting tips, visit
www.vtechuk.com/Customer-Support/
If your InnoTab 3 does not respond to an inserted cartridge, please carefully
®
try the following:
• Remove all batteries and unplug all wiring.
• Use a cotton swab dipped in rubbing alcohol or an alcohol-based window
cleaner to gently clean the contact area of the cartridge slot.
Backup battery
power low or backup
battery is not installed
correctly.
Touch screen requires
calibration.
microSD card format
is not FAT32.
The tablet's memory
was not formatted to
FAT32.
There is uneven
charge stored among
the cells in the battery
packs.
Replace backup battery and
make sure the backup battery
is installed correctly (for
backup battery replacement
instructions, please see
Backup Battery Replacement
section on page 23).
Turn the InnoTab
hold , and
turning the InnoTab
the steps on the screen.
Format the microSD card to
FAT32 in your computer.
If formatting the memory is
necessary, make sure it is
formatted to FAT32.
Charge the rechargeable
battery packs for 24 hours
(keep charging even after the
battery charging indicator light
stops flashing).
3 OFF. Then
®
down when
3 ON. Follow
®
25