Brake Pedal; Throttle Pedal - Polaris RZR 570 Owner's Manual

FEATURES AND CONTROLS

Brake Pedal

Depress the brake pedal to
slow or stop the vehicle.
Apply the brakes while
starting the engine.

Throttle Pedal

Push the pedal down to
increase engine speed. Spring
pressure returns the pedal to
the rest position when
released. Always check that
the throttle pedal returns
normally before starting the engine. Make sure there's adequate throttle
pedal freeplay. See page 104 for throttle pedal adjustment procedures.
This vehicle is equipped with a throttle release switch, which is
designed to reduce the risk of a frozen or stuck throttle. If the throttle
cable should stick in an open position when the operator releases the
throttle pedal, engine speed will be limited, and power to the rear wheels
will be reduced.
Rollover Protective Structure (ROPS)
The Rollover Protective Structure
(ROPS) on this vehicle meets OSHA
1928.53 rollover performance
requirements. Always have your
authorized POLARIS dealer
thoroughly inspect the ROPS if it ever
becomes damaged in any way.
No device can assure occupant
protection in the event of a rollover.
When used with seat belts and cab
nets, the ROPS helps prevent
occupants from being ejected from the
vehicle. Always follow all safe
operating practices outlined in this manual to avoid vehicle rollover.
WARNING! Vehicle rollover could cause severe injury or death. Always avoid
operating in a manner that could result in vehicle rollover.
34
Brake
Pedal
Throttle
Pedal
ROPS Label