Makita 9741 Instruction Manual page 6

Connecting t o dust collector
(Optional accessory)
The use of a dust collector makes sanding
operations clean and dust collection easy.
To
connect a dust collector, open the dust
port by sliding the cover plate up and in
a
clockwise direction. Attach the joint onto
the dust port. Now a dust collector can be
connected t o this
tool.
CAUTION
:
When not using a dust collector, close the dust port opening with the cover plate.
Switch action
To start the tool, simply pull the trigger.
Release the trigger to stop. For continuous
operation, pull the trigger and then push in
the lock button. To stop the tool from the
locked position, pull the trigger fully, then
release it.
.
Trigger switch
I
CAUTION
:
Before plugging in the tool, always check to
see
that the trigger swith actuates properly
and returns to the "OFF" position when released.
.
6