Table of Contents
Advertisement
NOTE: The steamer does not require distilled water. Residents in areas with hard water
should used distilled water for better performance.
USE:
7) Fill steamer by unscrewing water tank cap and filling the unit with water by using
measuring cup provided.
8) When red indicator light illuminates, steamer is ready for use. Be sure to have
desired attachments in place before plugging in the unit.
NOTE: It is recommended that another high wattage appliance is not operated on the
same circuit to avoid a circuit overload.
WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE
WAX MAY BE REMOVED BY THE HEAT AND STEAM ACTION. DO NOT USE ON
UNSEALED WOOD FLOORS OR LET UNIT STAND ON ANY WOOD FLOOR FOR AN
EXTENDED PERIOD OF TIME. THIS MAY CAUSE THE WOOD GRAIN TO RISE.
IT IS RECOMMENDED THAT A SECTION BE TESTED IN AN ISOLATED AREA OF
THE FLOOR. IT IS ALSO RECOMMENDED THAT YOU CHECK THE USE AND CARE
INSTRUCTIONS FOR CLEANING FROM THE FLOOR MANUFACTURER TO ENSURE
STEAM CLEANING IS ACCEPTABLE FOR YOUR WAXED SURFACE.
9) When steamer stops emitting steam simply refill the water tank and continue
cleaning.
WARNING: NEVER RUN THE STEAMER WITHOUT WATER.
10) When you finish cleaning, unplug power cord from outlet. Be sure to empty water
tank and carefully remove any accessories for drying.
CAUTION: The cloth pad may be very hot.
5
Advertisement
Table of Contents
