Battery Test; Mute; Parallel Unlock - INFOSEC E6 LCD-RT Evolution User Manual

2)

Battery Test

It is to check if the UPS could work well in battery mode and test the battery performance. This item could be shown in all
modes but it would not work in Battery/Fault/Eco mode. Related data will be shown at the same time.
3)

Mute

It is to check if the UPS could work well in battery mode and test the battery performance. This item could be shown in all
modes but it would not work in Battery/Fault/Eco mode. Related data will be shown at the same time.
4)

Parallel Unlock

That means the instruction of "parallel (protection) unlock". It only appears when the LCD shows the warning "3F: Para
Protect" (that means the parallel system is in protection and could not startup); if need to startup the UPS, this instruction
must be executed.
NOTE: Before executing this action, you must check if the system cables and connections are connected correctly and
safely. Please read the related contents in the section of trouble shooting.
→
→
→
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 05 13 AA 59 208 13
→
→
→
15