Enabling Random Playback (Vcd); Scene Angle/Title Selection/Dvd Menu; Changing The Scene Angle (Dvd); Selecting A Dvd Title (Dvd) - Toshiba 19SLV411U Owner's Manual

To resume normal playback:
In step 2, set Mode to Normal.
To change the program:
1. Set Mode to Program .
2. Press t or u, then p or q to select the
playback position you want to change the track
input for, then press
3. Use the Channel Number buttons (0-9) to input
the new track for the selected position.
To remove a track from the programmed list:
1. Set Mode to Program .
2. Press t or u, then p or q to select the
playback position, then press
To clear all the programs:
On the left column, press p or q to select Clear
Program, then press
.

Enabling random playback (VCD)

1
Press in stop mode.
Press p or q to select Mode, then press
2
repeatedly to select Shuffle.
Play Mode
Mode : Shuffle
Repeat : Off
Program Playback
3
Press to start random playback.
Note: If you set random playback during
playback mode, random playback will begin
after the current track finished playing.
To resume normal playback:
In step 2, set Mode to Normal.
60
Chapter 9: Advanced disc playback
.
.
Scene angle/Title selection/DVD
menu

Changing the scene angle (DVD)

When playing back a DVD recorded with multiangle
scenes, you can select the scene angle that you prefer.
1
Press during playback.
2
Press repeatedly until the preferred scene
angle is displayed.
Note: Depending on the DVD, you may not be
able to change the scene angle even if multiangle
data are recorded on the disc.

Selecting a DVD title (DVD)

Some DVDs contain two or more titles. If this is the
case, you can select a particular title for playback.
1
Press during playback to display the title
menu.
Press pqt u to select the preferred title.
2
3
Press or to start playback.
Note:
• Title selection may not apply to some DVDs.
• The title menu may simply be referred to a
"menu" or "title" in the instructions supplied
with the DVD.

DVD menu (DVD)

Some DVDs have an encoded menu that allows users
to select a specific disc content, enable a particular
DVD feature (e.g. subtitle or soundtrack language),
or choose a particular title (for multititle DVDs).
1
Press during playback.
Press pqt u to select a DVD menu item, then
2
press or to access it. Use the same keys
to enable an option for the selected item.
Repeat this step to configure other menu options.
3
Press again to resume playback on the
scene that was playing when you pressed
Note: Depending on the DVD, you may not be
able to resume playback from the same scene
that was playing when you pressed
.
.