Ford 2015 EXPEDITION Quick Reference Manual page 9

COMFORT
(CONTINUED)
Note: The power-folding seats operate for
POWERFOLD THIRD-ROW SEAT*
®
10 minutes after you switch the ignition off.
The transmission must be in park (P) and
the liftgate or liftgate glass must be open.
LEATHER CLEANING
For cleaning and removing spots and
stains, use Motorcraft
and Vinyl Cleaner** or a commercially
available leather cleaning product for
automotive interiors.
The 60/40 split-folding bench seat uses Note: Test any cleaning product on an
a power-activated seatback release. Fold
inconspicuous area first.
one side or both down for more flexibility.
Do not use the following products as these
The controls are located on the right-hand may damage the leather:
rear quarter trim panel that is accessible
• Oil and petroleum or silicone-based
from the liftgate area.
leather conditioners.
Note: Make sure you unfasten all of the
• Household cleaners.
safety belts.
• Alcohol solutions.
To lower
• Solvents or cleaners intended
1. Make sure you fold the head restraints
specifically for rubber, vinyl
down first.
and plastics.
2. Press and hold the FOLD control.
For complete information, see the Vehicle
Release the control once the seats
Care chapter of your Owner's Manual.
fold completely.
3. To return the seatback to its original
position, press and hold the UP control.
Release the control once the seats return
to the upright position.
page 16
MOONROOF*
The moonroof control is on the overhead
console. It has a one-touch open and
close feature. To stop its motion during the
one-touch operation, press the control a
second time.
Premium Leather To open, press and release the SLIDE
®
control. It stops short of the fully opened
position to help reduce wind noise. Press
the SLIDE control again to fully open the
moonroof. To close, pull and release the
SLIDE control.
To vent, press and release the TILT control.
Pull and hold the TILT control to close
the moonroof.
Once you close the moonroof, you can still
open or close the sliding shade manually.
Pull the shade toward the front of the
vehicle to close it.
**Do not use on the King Ranch seats. See the Vehicle Care Owner's Manual for details.
COMFORT
(CONTINUED)
AMBIENT LIGHTING*
When activated, ambient lighting illuminates key areas of your
interior with a choice of colors.
To access and make adjustments
1. Press the Settings icon > Vehicle > Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or decrease the intensity.
To turn the feature on or off, press the power button.
REAR HEATED SEATS*
Press the heated seat control repeatedly to cycle through the
settings and off. More lights indicate a higher setting.
*if equipped
MEMORY FEATURE*
The memory function saves and recalls the positions of the driver
seat, power mirrors and adjustable pedals. Use the memory
controls located on the left side of the driver's seat
program and then recall memory positions.
To program
1. Switch on the ignition.
2. Move the memory features to your desired position.
3. Press and hold the 1
button until you hear a tone.
Use this same procedure to set the second position using the
2 button .
You can now use these controls to recall the set
memory positions.
*if equipped
to
page 17