Frigidaire FFFU21M1QWA Use & Care Manual page 6

3. Base
Panel
Once the inside surface snaps inplace,
continue the process by rolling the handle
clip slightly outward and pressing down
firmly t osnap onto the outside surface. If
installed incorrectly, the handle clip will n ot
lay fiat.
_nel
Screws
Hinge Screws
Door Removal (upright models)
If door must be removed, unplug the unit,
1. Gently lay the unit on its back, on a rug
or blanket.
2. Remove 2 base screws and base panel.
3. Remove wire from clips on bottom of
cabinet if required.
4. Unplug connector, if required, by holding
the cabinet connector in place, and pulling
door connector out.
5. Remove bottom hinge screws.
6. Remove plastic top hinge cover.
7. Remove screws from top hinge.
8. Remove top hinge from cabinet.
9. Remove door and bottom hinge
from cabinet.
10. To replace door, reverse the above order
and securely tighten all screws to prevent
hinge slippage.
r Connector
Connector
Lid Removal (chest models)
See Instructions on hinge label. Unplug the unit.