Craftsman 247.372180 Operator's Manual page 9

3. Followthe stepsbelowto completehandleassembly:
a. Pullupwardon the handleuntil holesinlower handle (shownin
Figure 3deckcutaway) l ineup with holesinhandlebracket. S ee
Figure 4.
NOTE: Whenpullingupwardon handle,makesureto not pullhandleall the
wayout.
b. Insertthe T-boltsremoved in stepearlierthroughthe handle
brackets a ndlowerhandle andtightensecurely to secure the handle
inplace.SeeFigure 4.
c. Reattach wingnutsandcarriage bolts removed earlierinto lower
holesof handle asshownin Figure 5.
4. Theropeguideisattached to the rightsideof the upperhandle.Loosen the
wingknobwhichsecures the ropeguide.Refer t o Figure 6.
a. Holdbladecontrolagainst u pperhandle.
b. Slowlypullstarterropehandlefromengineandslipstarterropeinto
the ropeguide.SeeFigure 6.
c. Tighten ropeguidewingknob.
d. Use cabletiesto secure bladecontrolcableto lowerhandle.
Figure5
Figure4
Figure6
9