Related Manuals for Tamarack Technologies Dragon 100
Summary of Contents for Tamarack Technologies Dragon 100
- Page 1 The DRAGON Tamarack Technologies, Inc. Ventilation Solutions www.tamtech.com Date of Purchase Place of Purchase...
-
Page 2: Dimensional Data
Dimensional Data Fan Installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, OBSERVE THE FOLLOWING: (a) Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer. (b) Before servicing or cleaning the unit, switch the power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. -
Page 3: Electrical Connection
Select Fan Location When selecting a location to install the Dragon fan, take into consideration the application of the product, the locations of fresh air intakes, and sound generated by the Dragon unit. If ductwork is to be used, consider the path of the ducting material. -
Page 4: Wiring Instructions
buildings codes. Note: A licensed Electrician may be needed. If unsure, consult with your local Electrical Inspector. WIRING INSTRUCTIONS WARNING! Make sure that power supply is disconnected and locked to prevent accidental activation. 1. Remove the screws securing the terminal box cover plate located on the fan motor mounting bracket. -
Page 5: Wiring Diagrams
WIRING DIAGRAMS... -
Page 6: Limited Warranty
If, within the period of three years from the date of purchase, the Dragon (the Product) is defective or malfunctions in normal home use, Tamarack Technologies, Inc. will repair or replace the Product at its discretion without charge for labor or materials.