Craftsman 358.382000 Operator's Manual page 28

Pro series
Hide thumbs Also See for 358.382000:
Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCE
Maintenance
schedule
The following
is a list of the maintenance
that must be performed
on the machine.
Most of the items are described
in the
Maintenance
section.
Daily maintenance
Weekly
maintenance
Monthly
maintenance
Check the brake
band
on the chain
Clean the outside
of the machine.
Check
the starter,
the starter
cord
brake for wear.
Replace
when
less
and the recoil spring,
than
0.024
inch (0,6 ram) remains
at
the most worn point.
Check
that the components
of the
Check
that the vibration
damping
Check the clutch centre,
clutch drum
throttle
trigger
work safely.
(Throttle
lockout
and throttle
trigger.)
elements
are not damaged,
and clutch
spring
for wear.
Clean the chain brake
and check that
it operates
safely.
Make sure that the
File off any burrs
from the edges
of
Clean the spark plug. Check that the
chain catcher
is undamaged,
and
the bar.
electrode
gap is 0.020
inch (0,5 mm).
replace
it if necessary.
The bar should
be turned
daily for
more
even wear. Check
the
lubrication
hole in the bar, to be sure
it is not clogged.
Clean
the bar
Clean the carburetor
compartment.
Clean the outside
of the carburetor.
groove.
If the bar has a sprocket
tip,
this should
be lubricated.
Check
that the bar and chain
are
Clean the air filter. Replace
if
Check fuel hose for cracks
or other
getting
sufficient
oil.
necessary,
damage.
Change
if necessary.
Check
the saw chain with regard
to
visible
cracks
in the rivets and links,
whether
the saw chain is stiff or
Check
the cooling
system
weekly.
Empty the fuel tank
and clean the
whether
the rivets and links are
inside.
abnormally
worn. Replace
if
necessary.
Sharpen
the chain
and check
its
tension
and condition.
Check the
Empty the oil tank
and clean the
drive sprocket
for excessive
wear
inside.
and replace
if necessary.
Clean the starter
units
air intake.
Check all cables
and connections.
Check that nuts and screws
are tight.
Check
that the stop
switch works
correctly.
Check
that there
are no fuel leaks
from the engine,
tank
or fuel lines.
28 - English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents