Table of Contents
Advertisement
CAUTION.
I Avoid
Injury
or damage
to the
unit
or other
property
• Provide occasional ventilation during use. Do not direct airflow at fireplaces or other heat related sources as this could cause flare ups or make
units run excessivel%
Do not climb on or place objects on the unit.
Do not hang objects off the unit.
Do not place containers with liquids on the unit.
Turn off the air conditioner at the power source when it will not be used for an extended period of time.
Periodically check the condition of the unit's installation accessories for any damage.
Do not apply heavy pressure to the radiator fins of the unit.
Operate the unit with air filter in place.
Do not block or cover the intake grille, discharge area and outlet ports.
Ensure that any electrical/electronic
equipment is one yard away from the unit.
DO not use or store flammable gases near the unit.
READ THIS SECTION BEFORE ATTEMPTING
TO OPERATE AIR CONDITIONER,
Unit must be upright
for one hour prior to operating.
Operation of Current
Device
Plug in &
press RESET
The power
supply
cord contains
a current
device
that
senses
damage
to the power
cord. To test
your
power
supply
cord
do the following:
1,
Plug in the Air Conditioner.
2. The power
supply
cord
will have
TWO buttons
on the
plug head.
Press the
TEST button.
You will
notice
a click
as the
RESET button
pops
out.
3.
Press the RESET button.
Again
you will notice
a dick
as the
button
engages.
4, The power
supply
cord
is now
supplying
electricity
to the unit.
"
Always
make
sure the
RESET button
is pushed
in for correct
pperation.
The power
supply
cord
must
be replaced
if it fails to reset when
either
the TEST button
is pushed,
or it cannot
be reset. A new
one can be obtained
from
the product
manufacturer.
If power
supply
cord
is damaged,
it CANNOT
be repaired.
It MUST be replaced
by one obtained
from the
product
manufacturer.
@2009
Electrolux
Home Products,
Inc,
All rights reserved,
Advertisement
Table of Contents
