Dish TV S7070 Quick Start Manual

power
numeric
TV/radio
page up/down
channel (+/-)
OK
Menu
ESG
Teletext
favourite
timer

Inserting the batteries.

● Open the battery cover.
● Insert 2 AAA batteries (provided) by matching the + and - marks on the batteries
with the + and - marks in the battery compartment.
● Replace the battery door.
If you receive any warning on screen or have problems tuning in channels, reset
your Dish TV receiver.
On the back panel of the receiver is a power switch, turn this off for 15 sec and
then turn it back on. Exit the current screen and enter the Menu.
Choose installation and then Factory Default. Enter 0000 for the password and
Yes to reset.
S7070
mute
recall
volume (+/-)
navigation
exit
colour
text
MHEG EPG
subtitle
multiaudio
Thank you for choosing Dish TV for your Freeview satellite receiver.
This guide will provide you with simple instructions for connecting and operating
your Dish TV unit.
Further help can be found at www.dishtv.co.nz

Before you start

Please check that your Dish TV box contains all of the following components.
Dish TV S7070
Dish TV Remote Control
Composite Video Cable
Note: The Dish TV S7070 is a Freeview satellite receiver. It requires a working satellite
dish correctly aligned to the satellite Optus D1. It does not use a TV aerial.
S7070
User Manual
2 x AAA Batteries