Installation Requirements; Tools And Parts - Whirlpool WTW8500BR0 Installation Instructions Manual

INSTALLATION REQUIREMENTS
TOOLS AND PARTS To order, please refer to the phone number or website on the
Gather the required tools and parts before starting installation, back page of your "Use and Care Guide."
Tools needed:
Pliers that open to 19/16"
(39.5 mm)
Flashlight (optional)
Adjustable or open-end
wrench 9/16" (14 mm)
4"" I'nin
(102 mm)_
Wood block
Tape measure or ruler Level
Parts supplied (located in the washer basket):
Drain hose form
Cable Tie
[] 8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
[] 8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
[] 8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
[] 8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
(2 pack)
[] 8212487RP
[] 8212638RP
[] 8212637RP
5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
6 ft. (1.8 m) Nylon braided inlet hose, space
saving 90 ° elbow, hypro-blue steel couplings
(2 pack)
6 ft. (1.8 m) Inlet hose, Black EPDM, space
saving 90 ° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts (Not supplied with washer):
Your installation may require additional parts. To order, please
refer to the phone number or website on the back page of your
"Use and Care Guide."
if you have: You will need:
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
1" (25 mm)
diameter standpipe
2" (50 mm) diameter to 1" (25 mm)
diameter Standpipe Adapter Kit,
Part Number 3363920 and
Connector Kit, Part Number 285835
Overhead sewer
Standard 20 gal. (76 L) 39" (990 mm)
tall drain tub or utility sink, sump
pump, and connectors (available
from local plumbing suppliers)
Floor drain
Siphon Break Kit,
Part Number 285834
Extension Drain Hose,
Part Number 285863
Connector Kit, Part Number 285835
Parts needed (Not supplied with washer):
Drain hose too short
Extension Drain Hose,
Part Number 285863
Connector Kit, Part Number 285835
Lint clogged drain Drain protector, Part Number 376031
Water inlet hoses (2)
Flat inlet hose washers (4)