7. Level 2 Repair
5
1) Put the LCD FPCB though the hole of the
bracket.
2) Assemble the Sub Cam
( Caution
1) Be care of damage the FPCB.
2) Be care of scratch and molding damage.
7
1) Assemble the REAR upper side first.
( Caution
1) Be care of scratch and molding damage.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
1) Put the PBA ass'y on the front ass'y.
2) Connect the LCD and Sub key connectors.
3) Push the Cam and 3.5phi earjack.
( Caution
1) Be care of damage the FPCB.
2) Be care of scratch and molding damage.
8
1) Screw 6
points.(1.2 kg/force)
( Caution
1) Be care of scratch and molding damage.
7-4