Keylock - Fronius TransSteel 2500c Operating Instructions Manual

Keylock

A keylock can be selected to prevent the settings from being inadvertently changed on the
control panel. As long as the keylock is active
-
-
-
Activate/deactivate the keylock as follows:
Keylock activated:
The message "CLO | SEd" appears on the displays.
Keylock deactivated:
The message "OP | En" appears on the displays.
no settings can be made on the control panel
only parameter settings can be retrieved
any assigned "Save" button can be retrieved provided that an assigned "Save" button
was selected when the keylock was enabled
Press and hold the "Mode" button
1
Press the "Parameter selection" button (right)
2
Release the "Mode" and "Parameter Selection" buttons
3
33