Tv Back Panel Connections; Connecting Hdmi Or Dvi Devices - Toshiba 19S1400 Series Owner's Manual

TV back panel connections

TV back view
(aerial input terminal) — Analogue aerial signal
input.
VIDEO INPUT (input terminals) — Standard
(composite) video and standard stereo audio inputs.
Notes:
Before connecting any external equipment, turn off all
main power switches.
The unauthorized recording of TV programmes, DVDs,
video tapes and other materials may infringe upon the
provisions of copyright law.
VIDEO INPUT terminals
Connection example
DVD video player
(with video outputs)
or
Set Top Box
or
VCR (Normal)

Connecting HDMI or DVI devices

When turning on your electronic components, turn
on the TV rst, and then the HDMI and DVI device.
When turning off your electronic components, turn
off the HDMI and DVI device rst, and then the TV.
This TV may not be compatible with features and/or
speci cations that may be added in the future.
This TV is only operable with L-PCM and Dolby
Digital on 32/44.1/48kHz.
(19S1400 supports L-PCM only. )
This TV is able to connect with HDMI devices. But it
is possible that some HDMI devices may not operate
properly with this TV.
Connecting HDMI or DVI devices
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI and
uncompressed digital video from a DVI device. This
input is designed to accept HDCP programme material
in digital from CEA-861-D compliant consumer
electronic devices (such as a set top box and DVD
player with HDMI and DVI output).
The HDMI input is designed for best performance
with 1080i (50/60 Hz) and 1080p (24/50/60 Hz) high-
de nition video signals, but will also accept and
display 480i, 480p, 576i, 576p, and 720p (50/60 Hz)
and VGA (VESA 640 × 480 @ 60/72/75 Hz) signals.
HDMI: High-De nition Multimedia Interface
HDCP: High-bandwidth Digital Content Protection
CEA-861-D compliance covers the transmission
of uncompressed digital video with high-
bandwidth digital content protection, which is being
standardized for reception of high-de nition video
signals. Because this is an evolving technology, it is
possible that some devices may not operate properly
with the TV.
Acceptable PC signal format:
S-VGA: VESA 800 x 600 @ 56/60/72/75 Hz
XGA: VESA 1024 x 768 @ 60/70/75 Hz
W-XGA: VESA 1280 x 768 @ 60/75 Hz
W-XGA: VESA 1360 x 768 @ 60 Hz
S-XGA: VESA 1280 x 1024 @ 60 Hz
However, these signal formats are converted to match
the number of pixels of the LCD panel.Therefore, the
TV may not display small text properly.
If you connect this unit to your PC, the compressed
image is displayed in S-XGA mode, therefore the
picture quality may deteriorate and characters may not
be read.
L-PCM: Linear-Pulse Code Modulation
Supported Audio format: L-PCM, Dolby Digital
sample rate 32/44,1/48 kHz.
(19S1400 supports L-PCM only. )
- 8 -