Dimplex PLX 050/TI Instructions For Use Manual

Convector heater
Table of Contents

Advertisement

Available languages

Available languages

Montage- und Gebrauchsanweisung
Instructions for use
Instructions de fonctionnement
PLX 050/TI – PLX 200/TI
PLX 250, PLX 300
Wandkonvektor
Convector Heater
Convecteur de Base Mural
1

Advertisement

Table of Contents
loading

Summary of Contents for Dimplex PLX 050/TI

  • Page 1 Montage- und Gebrauchsanweisung Instructions for use Instructions de fonctionnement PLX 050/TI – PLX 200/TI PLX 250, PLX 300 Wandkonvektor Convector Heater Convecteur de Base Mural...
  • Page 2: Montage- Und Gebrauchsanweisung

    5. Heizbetrieb Sie sind so anzubringen, dass brennbare Gegenstände nicht entzündet werden können. Zulässig ist eine Montage der 5.1 Modelle PLX 050/TI bis PLX 200/TI Geräte an Holzwänden. Die Geräte dürfen nicht unmittelbar unterhalb einer Steckdose montiert werden. Die Bedienelemente sind auf der Gerätevorderseite unter einer verriegelbaren Klappe geschützt angebracht.
  • Page 3: Störungen

    5.3 Funktion der Bedienelemente 6.1 PLX 050/TI bis PLX 200/TI Zur Wiederinbetriebnahme des Gerätes beseitigen Sie die 5.3.1 Heizgeräte ohne Zeitschaltuhr Ursachen für das Ansprechen des Überhitzungsschutzes. Der Ein/Aus-Schalter wird zu Beginn der Heizperiode Gleichzeitig muss die Stromversorgung des Konvektors für eingeschaltet.
  • Page 4: Electrical Connection

    Installation and Operating Instructions PLX 050 – 300, PLX 050 TI – 200 TI Convector Heater 453321.66.53gb 02/03/A Drill the fixing holes for the wall bracket. 1. Warnings Screw the bracket securely to the wall. You are requested to read carefully all the information in Present the heater to the wall bracket and engage the these instructions.
  • Page 5: Technical Data, Dimensions

    6.1 PLX 050/TI - PLX 200/TI 5.3 Operation of the controls Should the cut-out operate, determine the reason for overheating (e.g. outlet grille obstructed) before resetting 5.3.1 Heaters without timers the cut-out. To reset the cut-out switch off or unplug the...
  • Page 6: Instructions De Fonctionnement

    Il est possible de monter le convecteur sur un mur en bois. Cet appareil ne doit pas être fixé sous une 5.1 Convecteurs PLX 050/TI à PLX 200/TI prise de courant. Les contrôles sont situés à l'avant du convecteur, protégés Il faut respecter les distances minimales A, B et C surtout par une porte verrouillable.
  • Page 7 Cette position est marquée par I. Le Vous devez couper l’alimentation électrique pendant commutateur (sauf PLX 050/TI) marqué • - •• permet de quelques minutes (mettez le interrupteur sur “O”). Lors le convecteur s’est suffisamment refroidi, il peut être remis en choisir la température désirée (•...
  • Page 8 Die Robert Bosch Hausgeräte-GmbH ist an 7 Tagen, 24 Stunden für Sie persönlich erreichbar! KKW Kulmbacher Klimageräte-Werk GmbH Telefon +49 (0) 9221 / 709-564 Technische Änderungen vorbehalten Geschäftsbereich Dimplex Telefax +49 (0) 9221 / 709-565 Am Goldenen Feld 18 E-Mail: Kundendienst@dimplex.de D-95326 Kulmbach Internet: www.dimplex.de...

This manual is also suitable for:

Plx 200/tiPlx 250Plx 300

Table of Contents