Connect To The Dst Adapter Using Wps - NETGEAR DST6501 User Manual

Connect to the DST Adapter Using WPS

¾ To connect devices to the DST adapter using WPS:
1. Press and hold the WPS and DST Router Sync button on the DST
adapter.
The WiFi LED on the DST adapter blinks.
2. Within two minutes, press the WPS button on your WiFi device (such
as a computer, tablet, or smartphone).
When the WiFi LED stops blinking, your WiFi client is automatically
connected to the DST adapter and you can access the Internet from
your WiFi device.
Note:
Make sure that your WiFi device is in the same room as the
DST adapter that you are connecting to.
12