The 'Right 2' Part, Combining With 'Right 1 - Kawai CP3 Quick Start Manual

Hide thumbs Also See for CP3:
Table of Contents

Advertisement

Page
8
Step 6
Touch Upright Piano, then play the keyboard.
The sound will have changed to a smaller, slightly more intimate piano sound.
Press the EXIT panel button, or wait for a few seconds, to return to the MAIN screen.
Repeat the steps above, and experiment with selecting the various acoustic piano, electric piano, and other keyboard
instrument sounds. Next, try selecting sounds from a different category, such as Strings, Organ, or Vocal etc., until you
become familiar at selecting sounds from each category button and sub-category.
If no panel buttons are pressed, and the display is not touched while showing different screen menus (such as
the sound category list), the display will automatically return to the MAIN screen after a period of 20 seconds.
To adjust this waiting period, or to prevent the MAIN screen from returning automatically, please refer to the
2
Display Control instructions in the main CP3 owner's manual.

THE 'RIGHT 2' PART, COMBINING WITH 'RIGHT 1'

The CP3 allows three different sound parts to be assigned to the keyboard at any one time. The RIGHT 1 and RIGHT 2
parts are used most frequently, and can either be played separately, or together. In the following steps we shall select
sounds for RIGHT 1 and RIGHT 2, practice activating and deactivating each part individually, before combining the two
parts simultaneously.
Step 1
Select the Concert Grand sound for RIGHT 1.
Step 2
Press the RIGHT 1 panel button.
Press the EXIT panel button, or wait for a few seconds, to return to the MAIN screen.
The LED indicator for the RIGHT 1 panel button will
turn off to indicate that the part is inactive.
Concert Grand will be written in small letters to
indicate that the Concert Grand sound is still selected,
but that the part is now inactive.

Advertisement

Table of Contents
loading

Table of Contents