Sounds; The 'Right 1' Part - Kawai CP3 Quick Start Manual

Page
6

2. SOUNDS

There are over 700 different instrument sounds built into the CP3, providing an almost limitless range of possible musical
playing styles. However, with such a large selection of instrument voices available, it is important to understand the various
methods of selecting and adjusting the sounds. After following the steps in this topic, you should become confident at
navigating around different screen menus, and be able to select multiple sounds within a few seconds.

THE 'RIGHT 1' PART

The panel buttons are responsible for controlling the majority of functions on the CP3, with buttons to the left of the display
associated with selecting and adjusting registrations/accompaniment styles, and buttons to the right of the display used
to select and adjust instrument sounds.
Step 1
Turn on the instrument.
2
After a brief wait the MAIN screen will appear, as seen below.
Step 2
Play the keyboard.
The sound of a full bodied Kawai EX Concert Grand will be heard.
Step 3
Adjust the volume level using the MASTER VOLUME slider.
The RIGHT 1 field is highlighted, with Concert Grand
written in large letters to indicate that the Concert
Grand sound is selected, and that the part is active.
The LED indicator for the RIGHT 1 panel button will
also be turned on.
Move the slider to the right or left to increase or
decrease the volume of the sound. The middle position
is often a good starting point.