Table of Contents
Advertisement
Building in the appliance
^ Whilst counterholding adjusting bolts
b with a screwdriver, tighten nuts a
at the top of the appliance door.
48
^ Attach the appliance door and the
furniture door using screws through
fixing brackets a:
– Drill holes in the furniture door (mark
the position of the holes first).
– Screw in the short 4 x 14 mm
chipboard screws b.
^ Align depth "Z" on the furniture door:
Loosen the screws in the long slots at
the top c and bottom d of the
appliance door. By moving the
furniture door, create a gap of 2 mm
between the furniture door and the
front edge of the niche. Align it to
match the neighbouring furniture
doors.
^ Close the door and align it with
neighbouring furniture doors.
^ Tighten all screws again.
Advertisement
Table of Contents
