1. Manuals
  2. Brands
  3. SunBriteTV Manuals
  4. Transceiver
  5. SB-HDWT
  6. Quick start manual

SunBriteTV SB-HDWT Quick Start Manual

Wireless hd transceiver
Hide thumbs Also See for SB-HDWT:
1
2
3
4

Advertisement

Table of Contents

See also: Operator's Manual
Quick Start Guide
SB-HDWT Wireless HD Transceiver
Thanks for purchasing the SunBriteTV SB-HDWT wireless HD
transceiver! Now let's get it working.
We're going to start by doing a quick test of the system to make
sure all the connections and components in the system are
working correctly before you install them permanently.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SB-HDWT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SunBriteTV SB-HDWT

Summary of Contents for SunBriteTV SB-HDWT

  • Page 1 Quick Start Guide SB-HDWT Wireless HD Transceiver Thanks for purchasing the SunBriteTV SB-HDWT wireless HD transceiver! Now let’s get it working. We’re going to start by doing a quick test of the system to make sure all the connections and components in the system are...
  • Page 2 Step 1: Connect the transmitter Start with the HDWT-Tx transmitter, which is the smaller of the two compo- nents in the system. You can lay it flat or mount it upright on its stand. Make sure it’s placed a couple of feet away from the other electronics.
  • Page 3 If you’ve checked all the above items and you’re still not getting a picture, please contact SunBriteTV. Step 4: Connect the IR blaster Place the transmitter as far away from other electronic equipment as you can.
  • Page 4 Step 5: Install the receiver Take one of the included rubber grommets and push it around the 15-foot HD cable near where it enters the receiver. Move the grommet to where it aligns with the slotted plastic piece on the underside of the receiver, and slide it in so the plastic pieces enters the groove around the grommet.

Table of Contents