This could result in electric shock or fire. ● If the SB-HDWT system will not be used for a month or longer, unplug the receiver's power cord and the transmitter's power supply. This will prevent damage from lightning...
1.3 Warning: Protect Transmitter From Heat/Moisture ● The transmitter should not be exposed to rain or moisture. Do not place objects filled with liquids, such as vases, on or near the transmitter. ● Install the transmitter in a property ventilated area, away from direct sunlight or any source of heat.
HD output. The HDWT-Rx connects to any TV with HD input, and its weather-resistant design allows it to be used outdoors. The SB-HDWT can save users the trouble and expense of running video and audio cables through walls.
2.4 HDWT-Tx Transmitter Controls and Connections FRONT PANEL 1. Power LED: Indicates that unit is powered 2. Video LED: Indicates that active HD source is connected 3. Link LED: Indicates wireless connection between HDWT-Tx and HDWT-Rx receiver 4. USB Interface: Used for PC connection or other USB device, such as a keyboard BACK PANEL 5.
3. Installation and Operation 3.1 Connecting the HDWT-Tx Transmitter You can lay the transmitter flat or mount it upright on its stand. Make sure it’s placed a couple of feet away from the other electronics. Avoid putting it inside a cabinet, which will reduce the range of the transmitter.
4) Move the transmitter and receiver so there’s a direct line of sight between them. If you’ve checked all the above items and you’re still not getting a picture, please con- tact SunBriteTV. 3.4 Mount the Receiver keyhole mounts Take one of the included rubber grommets and push it around the 15-foot HD cable near where it enters the receiver.
3.5 Setting Up for Multiple Transmitter Operation The HDWT-Rx receiver can be used with multiple HDWT-Tx transmitters, which are available separately from your SunBriteTV dealer or distributor. With multiple transmit- ters set up, you will be able to use mulitple source devices and switch among them using the Source button on the included remote control.
HDWT-Rx receiver to a computer connected to the HDWT-Tx transmitter. This ar- rangement may come in handy if you are using the SB-HDWT system to transmit HD video from a computer, or if you wish to browse the web through the TV connected to the system.
4. Product Specifications GENERAL SPECIFICATIONS Model HDWT-Tx HDWT-Rx Supported video frequencies 1080p, 720p, 1080i, 576p, 480p, 480i, 576i Supports HDMI1.3 audio format and encrypted video format HDMI port HDCP 2.0 Transmission distance 100 feet / 35 meters System latency <1 ms Antenna Built-in omnidirectional antennas Operating frequency...
5. Troubleshooting Before following the troubleshooting guide below, please make sure that transmitter, receiver, source equipment and display equipment are all switched on and properly connected. In normal operation, the Video LED on the receiver will be off (it is on only during the connection process.) The Power, Video and Link LEDs on the transmitter and the Power and Link LEDs on the receiver will glow steady green.
8.Other Information We suggest you read this user manual carefully before using our product. If any problems occur while using our product that cannot be resolved after consulting this manual, please contact us: E-mail: support@sunbritetv.com Tel: 866 357-8688...
Need help?
Do you have a question about the SB-HDWT and is the answer not in the manual?
Questions and answers