Advertisement
KIT - 06001
4. P0600 – 600 GPH PUMP
5. H16NK – 4' OF 1" NON KINK VINYL HOSE
6. F12MPTN2 – ¾"MPT 2" NIPPLE
7. V12FPT – ¾" FPT BALL VALVE
8.
F12MPT16B – ¾" MPT TO 1" BARB
KIT - 10501
4. P1050 – 1050 GPH PUMP
5. H16NK – 4' OF 1" NON KINK VINYL HOSE
6. F12MPTN2 – ¾"MPT 2" NIPPLE
7. V12FPT – ¾" FPT BALL VALVE
8.
F12MPT16B – ¾" MPT TO 1" BARB
SITE SELECTION
Select an area large enough to accommodate your new
fountain kit and any possible water loss due to splash.
Vegetation and structure not suitable for excessively wet
conditions should not be located near the water fountain due to
the possibility of splash. Area must be free of any underground
utilities and within 15ft of a GFI outlet (cord length 16')
RIGID LINER
PUMP KITS PARTS LIST
KIT - 10503
4. P1050 – 1050 GPH PUMP
5. H12NK – 4' OF 1" NON KINK HOSE (QTY 3)
6. F12MPTN2 – ¾"MPT 2" NIPPLE (QTY 5)
7. V12FPT – BALL VALVE ¾" FPT (QTY 3)
8. F12MPT16B – ¾" MPT TO 1" BARB (QTY 3)
9.
F12FPTTEE – ¾" FPT TEE (QTY 2)
STEP 1
Place the reservoir kit or grating (for soft liner kit) in the desired
location and use it as a template to mark the ground.
paint works well, or use a shovel to mark the area that needs to
be dug.
KIT - 06002
4. P0600 – 600 GPH PUMP
5. H12NK – 4' OF 1" NON KINK HOSE (QTY 2)
6. F12MPTN2 – ¾"MPT 2" NIPPLE (QTY 3)
7. V12FPT – BALL VALVE ¾" FPT (QTY 2)
8. F12MPT16B – ¾" MPT TO 1" BARB (QTY 2)
9.
F12FPTTEE – ¾" FPT TEE
KIT - 10502
4. P1050 – 1050 GPH PUMP
5. H12NK – 4' OF 1" NON KINK HOSE (QTY 2)
6. F12MPTN2 – ¾"MPT 2" NIPPLE (QTY 3)
7. V12FPT – BALL VALVE ¾" FPT (QTY 2)
8. F12MPT16B – ¾" MPT TO 1" BARB (QTY 2)
9.
F12FPTTEE – ¾" FPT TEE
SOFT LINER
Marker
Advertisement
