First Time Installation - Usb Connections; Switching On/Off; To Switch The Tv On; To Switch The Tv Off - Bush LED22134FHD Installation & Operating Instructions Manual

Getting Started

First Time Installation - USB Connections

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.
To switch on the TV from standby mode either:
Press the " " button, P+ / P- or a numeric button on
the remote control.
Press the side function switch until the TV comes on
from standby.

To Switch the TV Off

Press the " " button on the remote control or press
the side function switch until the TV switches into
standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK.
The First Time Installation (FTI) screen will be
displayed next. Set your preferences using the
navigation buttons and when finished, press OK to
continue.
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
You can activate Store mode (optional) option to
be available in "Other settings" menu and your TV's
features will be illustrated on the top of the screen.
A confirmation screen will be displayed. Select YES
to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
button to continue.
Select Yes, and the television will search for digital
terrestrial TV broadcasts.
English - 13 -