LG LBN20513 Series Owner's Manual page 17

2. Removing and Installing the Freezer Handle
NOTE: Before beginning, check the handle type of your
model.
Handle Type 1
• Remove the cap (1) and two screws (2) with a flat head
screwdriver.
• Loosen the two screws (3), remove the handle (4) and
install all on the right side.
• Attach the cap and the two screws (that were previously
removed) on the left side (5).
Handle Type 2
It is not necessary to remove this type of handle.
3. Removing the Refrigerator Door
• Gently remove the top hinge cover with a flat head
screwdriver (1).
• Using the 10 mm open-end wrench, remove the three
bolts and raise the top hinge and place aside (2).
• Remove the pivot (3) and the cap (4), place them in
the opposite side (the cap will be placed in the right
side and the pivot on the left side).
• Slightly raise the refrigerator door (5) and remove it.
• Once the door has been taken off, remove the screws
(6), the bolt (7) and the pivot (8) located below this
and remove the hinge (9).
1
2
8
7
9
6
REFRIGERATOR INSTALLATION
4
3
5
17
Handle Type 1
1
2
3
4
5
• Install the hinge (10) on the opposite side of the door,
replacing the screws (11), the bolt (12) and the pivot
(13).
13
12
• Take off the washer (14).
• Using the 1/4 inch hex socket wrench loosen the pin
(15) and remove.
• Remove the screws (16 & 17) and the hinge (18).
Handle Type 2
10
11
17
16
18
14
15