Ce Conformity Declaration - Axor Microspeed Plus Series Service Manual

CE CONFORMITY DECLARATION

The manufacturer: AXOR Industries
Address:
DECLARE under their own responsability that the following line
of products:
MICROSPEED PLUS with the relative options and accessories
series
installed in accordance with the operating instructions furnished
by the manufacturer, conform to the provisions of the following
directives, including the latest modifications and all relative
national issued legislation:
Machine Directive (89/392, 91/368, 93/44, 93/68)
Electromagnetic Compatibility Directive (89/336, 92/31,
93/68) And that · the following technical standards were
applied:
CEI EN 60204-1 Safety of machinery – Electrical
equipment of machines – Part 1: General requirements.
CEI EN 60439-1 Low-voltage switchgear and controlgear
assemblies – Part 1: Type-tested and partially type-
tested assemblies.
CEI EN 61800-3 Adjustable speed electrical power drive
systems – Part 3: EMC product standard including
specific test methods.
Recall: CEI EN 61000-4-2 CEI EN 60146-1-1.
CEI 28-6 Insulation co-ordination for equipment within
low-voltage systems – Part 1: Principles,
and tests.
CEI 64-8 Electrical system users of nominal voltage
not exceeding a 1000V.alternate current and a
1500V continuous current.
Montebello Vicentino, 19 Dicember 2000
64
Via Cà Sordis 6/g, 36054 Montebello
Vicentino (VI) ITALY
Service Manual
requirements
Management
MICROSPEED
Plus