Table of Contents
Advertisement
0
Three openings for feed-through elements, e.g. IEC or F feed-through
sleeves.
!
Two plugs for the LNB supply voltage (+18 V / max. 1 A total).
@
RF socket of the output collector.
This output socket is located on the back of the head-end station.
#
25-pin connector for the connection of a second head-end station if two
head-end stations are to be controlled via one control unit only.
$
Control unit with display; behind it the power supply unit.
The control unit
%
The buttons on the control unit
»MULTI«: The function is dependent on the cassettes used.
»MODE«:
To next menu item.
Back to access menu.
»VIDEO«: The function is dependent on the cassettes used.
»AUDIO«: The function is dependent on the cassettes used.
»1 2« (cursor functions):
select settings; move the cursor in the display ( _ ) to the left or right.
»+ / –«: change settings.
»M« (memory): save settings.
^
LED, illuminated during operation.
BE–Remote
please wait . . .
19
Fig. 2
- 8 -
- 8 -
V.30
18
17
16
15
Advertisement
Table of Contents
