Advertisement
Advertisement
Table of Contents
Related Manuals for Rockwell RG8280
Summary of Contents for Rockwell RG8280
- Page 1 26cc/600mm PETROL HEDGE TRIMMER SAFETY AND OPERATING MANUAL RG8280...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT Read carefully before use Keep for future reference Safe operating practices 1.1 Training Provide the following instruction: Become familiar with the owner’s manual before attempting to operate the equipment. 1.2 Preparation WARNING: a) THIS HEDGE TRIMMER CAN CAUSE SERIOUS INJURIES. Read the instructions carefully for the correct handling, preparation, maintenance, starting and stopping of the hedge trimmer. - Page 3 Store the hedge trimmer where the fuel vapour will not reach an open flame or spark. Always allow the hedge trimmer to cool down before storing. c) When transporting or storing the hedge trimmer, always fit the cutting device transport guard. PETROL HEDGE TRIMMER RG8280...
- Page 4 SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear eye protection Wear ear protection C-Tick approval mark...
- Page 5 13. REAR HANDLE ROTATION LOCK SWITCH 14. PRIMER BULB 15. AIR FILTER COvER LOCKING KNOB 16. CHOKE LEvER 17. SOCKET SPANNER FOR SPARK PLUG Not all the accessories illustrated or described are included in standard delivery. PETROL HEDGE TRIMMER RG8280...
-
Page 6: Technical Data
TECHNICAL DATA Engine displacement 26cc Maximum engine performance 0.65Kw Cutting speed 1700 reciprocations/min Max. Engine speed 10000/min Engine idle speed 3000/min Cutting length 600mm Max. Cutting diameter 22mm Ignition Non-contact electronic ignition Fuel tank capacity 0.6L Spark plug L8RTC (Torch) Carburetor H129 (Ruixing), H129 (Huayi) Ratio of petrol and oil... -
Page 7: Operation Introduction
30-day period. • Petrol is highly flammable and extreme precautions must be taken when handling or working with petrol. Petrol should only be stored in approved containers (not provided). PETROL HEDGE TRIMMER RG8280... - Page 8 positions to provide best operator comfort. 2) When trimming the top of a bush or hedge, the handle is best positioned vertically. NOTE: The handle can be locked in five vertical positions, to suit left or right handed operation. When trimming branches or the sides of a bush or hedge, the handle is best positioned horizontally.
- Page 9 • Always keep your body to the carburetor side of your trimmer, never on the exhaust side. • Maintain a steady, even posture while operating. PETROL HEDGE TRIMMER RG8280...
-
Page 10: Troubleshooting
9. BEST TRIMMING TIMES 2 to 3 times in order to distribute the oil evenly. Green leaf hedges are best trimmed between June Replace the spark plug. and October, evergreens should be trimmed in April and August, while conifers and other fast growing TROUBLESHOOTING shrubs can be trimmed every 6-8 weeks. - Page 11 Unit 15, 23 Narabang Way Belrose 2085 storing it in a clean dry place. NSW Australia FREE CALL 1300 889 028 4. MAINTENANCE OF THE GEARBOX EMAIL:office.sales@positec.com.au The gearbox must be lubricated every year before PETROL HEDGE TRIMMER RG8280...
- Page 12 POSITEC AUSTRALIA PTY LIMITED ABN 14 101 682 357 MADE IN PRC...
Need help?
Do you have a question about the RG8280 and is the answer not in the manual?
Questions and answers