Eng; Operation Of The Amplifier; Specifications - Hifonics nemesis series NXi4002 User Manual

Please read the user's manual carefully before the installation and the first

operation of the amplifier.

SPECIFICATIONS

Output Power RMS
Output Power Max.
Loudspeaker impedance
Frequency Response
Total Harmonic Distortion
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Lowpass Filter
Highpass Filter
Bass Boost
Operating Voltage
Fuse Rating
Dimensions (B x H x L)
All Specifications are subject to change
WARRANTY
This product meets the current EU minimum warranty requirements, if purchased in countries of the EU. To ensure your warranty
policy keep your original receipt proofing the date of purchase. Any damage to the product as a result of misuse, abuse, accident,
incorrect wiring, improper installation, alteration of date code or barcode labels, revolution, natural disaster, or any sneaky stuff
because someone messed up, repair or alteration out side of our factory or authorized service centers and any thing else you
have done that you should not have done is not covered. This warranty is limited to defective parts and specifically excludes
any incidental or consequential damages connected therewith.

ENG

NXi4002
2 x 100 W @ 4 Ohms
2 x 180 W @ 2 Ohms
2 x 200 W @ 4 Ohms
2 x 360 W @ 2 Ohms
2 – 8 Ohms
5 – 40 000 Hz (-3 dB)
< 0,05 % (1 kHz)
> 90 dB
4 – 0,2 V
47 kOhms
30 – 150 Hz @ 12 dB/Octave
10 – 1200 Hz @ 12 dB/Octave
0 - 12 dB
+12 V (12 – 16 V), negative ground
2 x 20 A
250 x 52 x 250/280 mm
8