Hegel H360 User Manual page 17

Special Functions
Set Power Up Volume
A user defined volume value may be used as
the power up volume. As a precaution the
power up volume value is limited to a maxi-
mum level. The current volume is set as the
power up volume by pressing and holding
the DAC+ button while pressing Vol- on the
RC8 remote control.
Max Volume
A user defined volume value may be used as
the max volume.
The current volume is set as the max volume
by pressing and holding the DAC+ button
while pressing Vol+ on the RC8 remote
control. To reset, put to max voulme, press
and holding the DAC+ button while pressing
Vol+ on the RC8 remote control.
Reset to Factory Default Settings
By pressing and holding the DAC+ button
while pressing Mute on the RC8, the H360
will be reset to factory settings. This will
clear all user defined settings, including IP
settings, and reinitialize the H360.
WARNING: If Home Theater is configured
as AN2, this will go back to Home Theater,
HIGH volume.