Buick 2014 Enclave Owner's Manual page 59

Entering and Exiting the
Third Row
Warning
Using the third row seating
position while the second row is
folded, or folded and tumbled,
could cause injury in a sudden
stop or crash. Be sure to return
the seat to the passenger seating
position. Push and pull on the
seat to make sure it is locked into
place.
Caution
Folding a rear seat with the safety
belts still fastened may cause
damage to the seat or the safety
belts. Always unbuckle the safety
belts and return them to their
normal stowed position before
folding a rear seat.
To access the third row:
1. Remove objects on the floor in
front of or on the second row
seat, or in the seat tracks on the
floor.
2. Move the front center console
armrest completely forward. See
Center Console Storage on
page 4-2.
3. Place the folding armrests in the
upright position.
4. Make sure that the safety belt is
unfastened and in the stowed
position.
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
5. Pull the sliding seat lever (3)
forward. The seatback will tilt
forward, and the seat will begin
sliding forward. Continue to push
forward on the seatback until the
entire seat moves all the way
forward and the seat cushion is
folded.
Returning the Seat to the
Seating Position
To return the second row seat to its
normal seating position:
1. Remove objects on the floor
behind the second row seat or in
the seat tracks on the floor.
2. Slide the seat rearward by
pushing on the seatback until
the seat is locked into place.
3. Continue pushing the seatback
rearward until the seatback is
locked into place.
4. Push down on the rear of the
seat cushion until it is locked in
place.
3-9