Buick 2014 Enclave Owner's Manual page 194

7-24 Infotainment System
Using the Store Command
1. Press / .
2. Say Store.
3. Say the phone number or group
of numbers you want to store all
at once with no pauses, then
follow the directions given by the
system to save a name tag for
this number.
Using the Digit Store Command
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press / .
2. Say Digit Store.
3. Say each digit, one at a time,
that you want to store. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered, say
Store, and then follow the
directions given by the system to
save a name tag for this number.
Using the Delete Command
1. Press / .
2. Say Delete.
3. Say the name tag you want to
delete.
Using the Delete All Name Tags
Command
This command deletes all stored
name tags in the Hands-Free
Calling Directory and the OnStar
Turn-by-Turn Destinations Directory,
if equipped.
To delete all name tags:
1. Press / .
2. Say Delete all name tags.
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
I n f o r ma t i o n P r o v i d e d b y :
Using the List Command
1. Press / .
2. Say Directory.
3. Say Hands-Free Calling.
4. Say List.
Making a Call
Calls can be made using the
following commands.
Dial or Call: The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Re-dial: This command is used to
dial the last number used on the cell
phone.
Using the Dial or Call
Command
1. Press / .
2. Say Dial or Call.