Advanced Setting; Voltage Configuration - ASROCK Z170 PRO4/D3 User Manual

Z170 Pro4/D3
Configure tZQCS.

Advanced Setting

ODT WR (CH A)
Configure the memory on die termination resistors' WR for channel A.
ODT WR (CH B)
Configure the memory on die termination resistors' WR for channel B.
ODT PARK (CH A)
Configure the memory on die termination resistors' PARK for channel A.
ODT PARK (CH B)
Configure the memory on die termination resistors' PARK for channel B.
ODT NOM (CH A)
Use this to change ODT (CH A) Auto/Manual settings. The default is [Auto].
ODT NOM (CH B)
Use this to change ODT (CH B) Auto/Manual settings. The default is [Auto].
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.

Voltage Configuration

CPU Vcore Voltage
Configure the voltage for the CPU Vcore.
DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].
PCH +1.0 Voltage
Configure the chipset voltage (1.0V).
VCCIO Voltage
Configure the voltage for the VCCIO.
GT Voltage
Configure the GT voltage.
51