Advanced Setting
ODT WR (CH A)
Configure the memory on die termination resistors' WR for channel A.
ODT PARK (CH A)
Configure the memory on die termination resistors' PARK for channel A.
ODT NOM (CH A)
Use this to change ODT (CH A) Auto/Manual settings. The default is [Auto].
ODT WR (CH B)
Configure the memory on die termination resistors' WR for channel B.
ODT PARK (CH B)
Configure the memory on die termination resistors' PARK for channel B.
ODT NOM (CH B)
Use this to change ODT (CH B) Auto/Manual settings. The default is [Auto].
ODT WR (CH C)
Configure the memory on die termination resistors' WR for channel C.
ODT PARK (CH C)
Configure the memory on die termination resistors' PARK for channel C.
ODT NOM (CH C)
Use this to change ODT (CH C) Auto/Manual settings. The default is [Auto].
ODT WR (CH D)
Configure the memory on die termination resistors' WR for channel D.
ODT PARK (CH D)
Configure the memory on die termination resistors' PARK for channel D.
ODT NOM (CH D)
Use this to change ODT (CH D) Auto/Manual settings. The default is [Auto].
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
66