Floor Rails And Hooks - Removing; Floor Rails And Hooks - Inserting - Volvo XC 70 Owner's Manual

Floor rails and hooks – removing
The load-securing hooks can easily be
removed, for example, to clean the rail.
To remove a hook, fold it down in the
direction in which its opening points.
Press the hook down lightly and move the
it to an opening in the rail.
Pull the hook straight up.
Replace a hook in the rail in the reverse order.
NOTE
In order to return a removed hook into a
rail, it must be pressed down lightly.
Models with moveable hooks only.
3
3 Related information
•
Loading – general (p. 142)
•
Floor rails and hooks – inserting (p. 145)
•
Floor rails and hooks – moving (p. 144)
I n f o r ma t i o n P r o v i d e d b y :
05 Loading and storage
Floor rails and hooks – inserting
Models with moveable hooks only: upper illustra-
tion: hooks correctly installed, Lower illustration:
hooks incorrectly installed
It is important to insert the hooks correctly in
the rails. The hooks' openings should point
away from each other.
•
The opening on the hook closest to the
rear seat backrest should point toward
the backrest.
•
The opening on the hook closest to the
tailgate should point toward the tailgate.
05
}}
145