Table of Contents
Advertisement
SETUP
SETUP
Stand Assembling Procedures(Case#1)
The monitor is packed with stand and main body separated.
Please join the stand with the main body before use.
1. Put some smooth pad or cloth on the level surface and place the
monitor on it with the face downward.
2. Join the stand with the metal protrusion from the bottom of the
monitor's main body.
3. Tighten the screw fully at the bottom of the stand by turning it
clockwise three to four turns.
4. After fully tightening the screw, bend the knob of the screw onto the
bottom of the stand.
Caution : Incomplete tightening of the screw may cause the monitor unstable.
English - 5
Advertisement
Table of Contents
