1. Manuals
  2. Brands
  3. Advanced Technology Video Manuals
  4. Monitor
  5. M170CP3
  6. User manual

Advanced Technology Video M170CP3 User Manual

17" cctv monitor 19" cctv monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Summary of Contents for Advanced Technology Video M170CP3

  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read all of these instructions. 12. For added protection for this monitor during a lightning storm, 2. Save these instructions for later use. or when it is left unattended and unused for long periods of time, 3. Unplug this monitor from the unplug it from the wall outlet.

  • Page 4: Canadian Notice

    FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a NOTE : Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 5: Table Of Contents

    CONTENTS CONTENTS Introduction ................1 Product Features ..............2 Remote Control ..............3 Setup ..................5 Stand Assembling Procedures ..........5 Connection ................7 Operation & Adjustment ............8 OSD Function .................13 Specifications ................. 21 Factory Preset Timings ............23 Monitor Rotation ..............

  • Page 6: Introduction

    INTRODUCTION INTRODUCTION This manual explains how to correctly install, operate and get the best performance from your monitor. Please read this user’s guide carefully before installing your monitor, then keep it near your monitor for quick reference. First, please check that the contents of the box corresponds with the following checklist : •...

  • Page 7: Product Features

    PRODUCT FEATURES The monitor is designed for use in a small work area or for those who need more work space on the desk. The convenient and user-friendly on-screen display allows for easy and accurate adjustments of screen size, position and screen color.

  • Page 8: Remote Control

    REMOTE CONTROL REMOTE CONTROL R1 POWER ·Turns the set on from stand-by or off to Stand-by mode. R2 INPUT SOURCE ·Select the signal source from the multiple input sources. R3 MUTE ·Turns the sound on and off (Optional) R4 NUMBER Button ·Not used.
  • Page 9 R13 OK R23 ZOOM ·Select menu items. ·Select the Screen format (CAM/HDMI mode only) R15 VOL +/- R24 SIZE ·Adjust the sound level (Optional) ·Select the size of PIP display. (Optional) R16 PR +/- R25 SKIP ·Not used. ·Not used. R18 PC ·Select the VGA mode directly R26 PIP...

  • Page 10: Setup

    SETUP SETUP Stand Assembling Procedures(Case#1) The monitor is packed with stand and main body separated. Please join the stand with the main body before use. 1. Put some smooth pad or cloth on the level surface and place the monitor on it with the face downward. 2.
  • Page 11 Stand Assembling Procedures(Case#2) 1. Put some smooth pad or cloth on the level surface and place the monitor on it with the face downward. 2. Insert the protrude of stand thoroughly into pedestal. Stnad Disassembling Procedures Stnad Disassembling Procedures 1. Put some smooth pad or cloth on the level surface and place the monitor on it with the face downward.

  • Page 12: Connection

    CONNECTION 1. DC 12V Input 2. VIDEO OUT Composite signal output 3. VIDEO IN Composite signal input 4. AUDIO L Audio signal input left 5. AUDIO R Audio signal input right 6. PC Stereo Input 7. Head Phone Out 8. HDMI HDMI signal input 9.

  • Page 13: Operation & Adjustment

    OPERA TION & ADJUSTMENT OPERA TION & ADJUSTMENT CONTROL PANEL (Case #1) POWER Indicator Shows both normal operation and power management status with power indicator light. POWER Up Arrow - Auto Adjustment Switches the monitor on Primary Function: Automatically and off. adjusts the display to the most optimal setting possible.(VGA Right Arrow - Volume...
  • Page 14 CONTROL PANEL (Case #2) POWER Indicator Shows both normal operation and power management status with power indicator light. POWER Up Arrow - Auto Adjustment Switches the monitor on Primary Function: Automatically and off. adjusts the display to the most optimal setting possible.(VGA Right Arrow - Volume MODE) Selects menu.
  • Page 15 KEY PROCESS ① Press MENU to launch the OSD(On-Screen Display) Main Menu. ② Use Left-Right button to select the menu. ③ Use Down button to select the sub menus. ④ Use Up-Down buttons to select sub-menu function. ⑤ Press SOURCE button, then using left-right buttons you can make adjustments as necessary ⑥...

  • Page 16: Hot Key

    HOT KEY Selects signal in order. VGA - HDMI - CAM When there is no OSD, if you press this ▲ (UP/AUTO) button, you can use the best displayperformance fit for a current mode. When there is no OSD, you can adjust the volume directly.
  • Page 17 ADJUSTMENT PROCEDURE Perform the Auto tracking Is the H.SIZE proper? Adjust the control. CLOCK Perform the H-POSITION. Is the noise displayed on the screen? Adjust the until CLOCK the screen is cleared. Is the noise displayed on the screen yet? English - 12...

  • Page 18: Osd Function

    OSD FUNCTION VGA MENU (HDMI) ◈ ◈ P I C T U R E 1. Contrast Adjust the contrast of image, the difference between light and dark areas on the screen. 2. Brightness Adjust the brightness of image. 3. Color Mode Choose different preset color temperatures or set your own customized color parameters.
  • Page 19 G E O M E T R Y 1. H-Position Adjust the position of the display horizontally (left or right). 2. V-Position Adjust the position of the display vertically (up or down). 3. Clock Adjust the width (horizontal size) of the Screen image.
  • Page 20 P I P 1. Multi Window Activate or cancel the PIP function. 2. Sub Source Select the input source the PIP screen. (CAM) 3. Size Select the PIP display size. (Small/Middle/Large/Double 1/Double 2) 4. Position Adjust the PIP display position. (R-Up/R-Down/L-Down/L-Up) 5.
  • Page 21 CAM MENU ◈ ◈ P I C T U R E 1. Contrast Adjust the contrast of image, the difference between light and dark areas on the screen. 2. Brightness Adjust the brightness of image. 3. Tint Adjust the Tint of image. 4.
  • Page 22 F U N C T I O N 1. 3D NR. Reduce the noise in the picture due to poor reception or poor picture quality. (Off/Low/Middle/High) 2. MADi Generation advanced color engine automatic picture enhancement gives. (2D/3D) 3. H-Size Adjust the width (horizontal size) of the Screen image.
  • Page 23 5. OSD Time out Adjust the display OSD Menu. (5~60 Second) 6. OSD Transparency Adjust the OSD. Transparency 7. Information Shows the status of the current Display settings. 8. Memory Recall Reset the screen to the Factory Preset Display Settings. P I P 1.
  • Page 24 PIP TABLE MAIN HDMI HDMI : Supported X : Non Supported English - 19...
  • Page 25 SELF DIAGNOSIS If there is no image, the Self Diagnosis screen will be displayed. Self Diagnosis function checks if the status of the monitor screen is No Signal, Out of range or None support. No Signal screen is displayed when the D- Sub signal connector is connected but the status of the monitor is on DPMS mode.

  • Page 26: Specifications

    SPECIFICA TIONS SPECIFICA TIONS <17 inch> Panel Size 17-inch(43.2 cm) diagonal Pixel Pitch 0.264 x 0.264 mm Viewing Angle 170°(H) 160°(V) Contrast Ratio 1000:1(typ) Brightness 250cd/m brightness(typ) Response Time Color Filter RGB vertical stripe Synchronization Horizontal 30 - 80 KHz Vertical 56 - 77 Hz Video Bandwidth...
  • Page 27 <19 inch> Panel Size 19-inch(48 cm) diagonal Pixel Pitch 0.294(H)mm x 0.294(V) mm Viewing Angle 170°(H) 160°(V) Contrast Ratio 1000:1(typ) Brightness 250cd/m brightness (typ) Response Time Color Filter RGB vertical stripe Synchronization Horizontal 30 - 80 KHz Vertical 56 - 77 Hz Video Bandwidth 140 MHz Max Resolution...

  • Page 28: Factory Preset Timings

    ACTOR Y PRESET TIMINGS ACTOR Y PRESET TIMINGS VESA MODES Mode Resolution H.Freq(KHz) V.Freq(Hz) Remark (dots Xlines) 640 X 480@60Hz 31.5 Non-interlaced 640 X 480@72Hz 37.9 Non-interlaced 640 X 480@75Hz 37.5 Non-interlaced SVGA 800 X 600@56Hz 35.2 Non-interlaced SVGA 800 X 600@60Hz 37.9 Non-interlaced SVGA...

  • Page 29: Monitor Rotation

    MONIITOR ROT TIION (OPTIIONAL) MONIITOR ROT TIION (OPTIIONAL) English - 24...

  • Page 30: Changing The Stand

    CHANGING THE ST CHANGING THE ST Removing Original Stand(Case#1) Turn off the monitor and pull out the power cable. Place a cushion or a soft cloth on the floor and put the product on it with the front of the monitor facing the floor. 1.
  • Page 31 Removing Original Stand(Case#2) Turn off the monitor and pull out the power cable. Place a cushion or a soft cloth on the floor and put the product on it with the front of the monitor facing the floor. 1. 1. Detach the rear cover of the stand with a screwdriver. 2.
  • Page 32 ATTACHING THE MONITOR WITH THE ARM-STAND(OPTION) Support stand Surface for stand installation Tighten up screws at the locations indicated by arrows. This monitor’s installation surface is compatible with various kinds of VESA standard stands. Hole spacing : 100x100 mm Screw Length : 8~12 mm English - 27...

  • Page 33: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING Symptom Check Picture is jitterd. Adjust Clock to set the screen position and adjust Clock fine until a noise isn’t displayed. No picture. Check if power switch and computer power switch are in the on position. Check if the signal cable is correctly connected to the video card.
  • Page 34 Symptom Check Adjust the volume on the OSD Menu. Low sound. Adjust the volume of the sound card in the computer. VIDEO screen Check if PICTURE mode has been set. cannot be seen. Check if the video terminal is properly connected. Check if the video cable is correctly connected to the No video.
  • Page 35 MEMO MEMO...
  • Page 36 MEMO MEMO...
  • Page 37 MEMO MEMO...
  • Page 38 MEMO MEMO...
  • Page 40 S/N:9978641918...

This manual is also suitable for:

M190cp3

Table of Contents