Page 2
Safety Information Reset Do not attempt to disassemble or repair the WP-ID5BT WARNING: Resetting the WP-ID5BT: Hold yourself. Please call SSV Works for technical assistance Remove fuse from SSV Works fuse holder To reset the microprocessor to the original or repair information. Changes or modifications to the...
Page 3
7. 3.5mm Jack: Plug the 3.5mm jack into a device MODE TRACK In order for the WP-ID5BT to remember the information. In the radio mode the radio fre- (MP3 or phone) with a 3.5mm socket. The current radio station and audio settings the unit quency is displayed.
Page 4
Sound Controls FM Radio Operations Selecting the Play Source: Volume Control: Increase TRACK MODE Increase the volume by pressing VOL button. TRACK MODE Press the MODE button until “rAd” appears in Decrease the volume by pressing the VOL Decrease the display. button.
Page 5
5. From your mobile device scan for available devices. Select ”SSV ID5BT” to connect to the unit. 6. When the mobile device has been paired “PLAY” will appear in the WP-ID5BT’s display and audio can be Treble heard through the speakers.
Page 6
Rear 4. Close the weatherproof door. F - - r = Equal sound front and rear Speaker 5. Turn on the WP-ID5BT by pressing the r 7 = Rear speakers only button. F 7 = Front speakers only 6. Press the MODE button until “AU In” appears After 5 seconds control reverts back to vol- in the display.
Need help?
Do you have a question about the WP-ID5BT and is the answer not in the manual?
Questions and answers