CHAPTER 5: Interpreting Cable Test Results
the first and second line of the wire map
with split pairs flash when there is a split
pair error. See Figure 5-4.
The SOHO Tester has the ability to turn
off the split pair error testing. Pressing the
button for the current cable test mode
more than two seconds turns off the split
pair testing. The SPLIT icon and the word
OFF appear on the screen momentarily to
indicate this. The split pair testing will
resume the next time the tester is turned
on, or it may be toggled back on by
another two-second press of the current
test mode button.
33