To Test A Coax Cable - Black Box TS590A User Manual

SOHO TESTER

4.2 To Test a Coax Cable

1. Attach one end of the coax cable to
be tested to the F-connector on the
main unit.
2. The remote unit is installed in an
opening at the bottom of the main
unit. Remove the remote unit from
the main unit by squeezing the
remote lightly between your thumb
and forefinger and pulling it out.
Remove the coax identifier (which is
installed in a storage pocket on the
back of the remote) and attach it to
the other end of the cable to be
tested.
3. Press the COAX button to power on
the unit and begin testing. The
results are updated about once a
second.
24