Getting Remote Support For Your Tv - Samsung 9000 Series 9 User Manual

Intermittent Wi-Fi
•
Check the distance between the TV and the Modem/Router. The distance should not exceed 50ft (15.2 m).
•
Verify that there are no obstacles between the TV and the Modem/Router.
(The Wi-Fi strength can be decreased by appliances, cordless phones, stone walls/fireplaces, etc.)
•
Check the cable that connects the Modem to the Router (if you use a separate Modem and Router) to see
if it is in good condition. If it is not, replace the cable.
• Connect the TV to your Modem/Router using a CAT 7 cable and try to set up a wired network connection.
(MENU > Network > Network Settings).
•
Check Network Status (MENU > Network > Network Status) to see if the IP address is invalid, for example,
169.x.x.x. If it is, call your ISP to get a valid IP address, and then ask them to check the connection not only
between your Modem and Router but also between the Modem / Router and the Internet.
•
If you see a valid Mac address, call your ISP and ask them to reset your network circuit to re-register the
Mac addresses of your new Modem/Router and the TV.
Netflix problems
•
Change the DNS to 8.8.8.8. Select MENU > Network > Network Status > IP Settings > DNS setting > Enter
manually > DNS Server > enter 8.8.8.8 > OK
•
Verify that the ESN for Netflix is valid. (Go to MENU > Support > Contact Samsung)
Reset Netflix by selecting MENU > Smart Hub > Reset Smart Hub.
Smart Hub error messages
•
Reset Smart Hub by selecting MENU > Smart Hub > Reset Smart Hub.
•
Update the TV's software (MENU > Support > Software Update).

Getting remote support for your TV

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can
remotely:
•
Diagnose your TV
•
Adjust the TV settings for you
•
Perform a factory reset on your TV
•
Install recommended firmware updates
How does remote support work?
You can easily have a Samsung Tech remotely service your TV:
1.
Call the Samsung Contact Center and ask for remote support.
2.
Open the menu on your TV and go to the Support section.
3.
Select Remote Management, then read and agree to the service agreements. When the PIN screen
appears, provide the PIN number to the agent.
4.
The agent will then access your TV. That's it!
[JS9000-ZA]BN68-06963A-01ENG.indb 12
English - 12
2015-01-23 오후 1:14:18