Changing The Wiper Blades; Adjusting The Headlamps; Vertical Aim Adjustment - Ford 2016 EXPEDITION Owner's Manual

CHANGING THE WIPER
BLADES
Note: Do not hold the wiper blade when
lifting the wiper arm.
E165804
1. Pull the wiper blade and arm away
from the glass.
3
E205141
2. Lift the wiper blade primary locking clip.
Expedition (TB7) Canada/United States of America, enUSA, First Printing
Maintenance
2
4
I n f o r ma t i o n P r o v i d e d b y :
255
3. Press the wiper blade secondary
locking clip.
4. Remove the wiper blade.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
5. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.

ADJUSTING THE HEADLAMPS

Vertical Aim Adjustment

The headlamps on your vehicle are
properly aimed at the assembly plant. If
your vehicle has been in an accident,
contact an authorized dealer to check and
realign your headlamps.
Headlamp Aiming Target
E142592
A 8 feet (2.4 meters).
B Center height of lamp to ground.
C 25 feet (7.6 meters).
D Horizontal reference line.