Oil Change Indicator Reset - Ford 2016 EXPEDITION Owner's Manual

E142732
Only use oils certified for gasoline engines
by the American Petroleum Institute (API).
An oil with this trademark symbol
conforms to the current engine and
emission system protection standards and
fuel economy requirements of the
International Lubricants Specification
Advisory Council (ILSAC), comprised of
U.S. and Japanese automobile
manufacturers.
1. Check the engine oil level.
2. If the engine oil level is not within the
normal range, add engine oil that
meets Ford specifications. See
Capacities and Specifications (page
303).
3. Remove the engine oil filler cap and
use a funnel to pour the engine oil into
the opening.
4. Wipe off any spilled oil.
5. Recheck the engine oil level. Make sure
the oil level is not above the normal
operating range on the engine oil level
dipstick.
6. Install the engine oil level dipstick and
ensure it is fully seated.
7. Fully install the engine oil filler cap by
turning the filler cap clockwise until
three clicks are heard or until the cap
is fully seated.
Expedition (TB7) Canada/United States of America, enUSA, First Printing
Maintenance
OIL CHANGE INDICATOR
RESET
Use the information display controls on
the steering wheel to reset the oil change
indicator.
From the main menu scroll to:
Message
Settings
Vehicle
Oil Life
Hold OK to
Reset
I n f o r ma t i o n P r o v i d e d b y :
246
Action and description
Press the right arrow button,
then from this menu scroll
to the following message.
Press the right arrow button,
then from this menu scroll
to the following message.
Press the right arrow button,
then from this menu scroll
to the following message.
Press and hold the OK
button until the instrument
cluster displays the
following message.
Reset Successful
When the oil change indic-
ator resets the instrument
cluster displays 100%.
Remaining Life
{00}%
If the instrument cluster
displays one of the following
messages, repeat the
process.
Not Reset
Reset Cancelled