Care And Cleaning; Gas Surface Burner; Removing And Replacing The Gas Surface Burner; Burner Heads/Caps - LG LRG3083ST Owner's Manual

CARE AND CLEANING

Gas Surface Burner

CAUTION
DO NOT clean this appliance with bleach.
To prevent burns, wait until the cooktop has cooled down before touching any of its parts.

Removing and Replacing the Gas Surface Burner

Grates and burner caps/heads can be removed for care and cleaning.
Medium burner
head and cap
Large burner
head and cap
Medium burner
head and cap
Large burner
head and cap

Burner Heads/Caps

For even and unhampered flame, the slits in the burner heads must be kept clean at all times. The burner heads and caps (and
the oval burner head and cap assembly) can be lifted off. Do not attempt to remove the oval burner cap.
Wash the burner bases and caps in hot soapy water and rinse with clean water. Run water through the oval burner from the
bottom stem to flush out debris.
Any spills on or around an electrode must be carefully cleaned.
To remove burnt-on food, soak the burner heads in a solution of mild liquid detergent and hot water for 20–30 minutes.
For stubborn stains, use a toothbrush or wire brush.
The burners will not operate properly if the burner ports or electrodes are clogged or dirty. Use a wire brush or pipe cleaner
to unclog ports on the oval burner.
Burner caps and heads should be cleaned routinely, especially after bad spillovers.
Burners will not light if the cap is removed.
side grate center grate
LRG3085 / LRG3083
side grate center grate
LRG3081
Burner cap is properly set.
Burner cap is NOT
properly set.
CARE AND CLEANING
side grate
Oval burner
head and cap
Small burner
head and cap
Extra large burner
head and cap
side grate
Medium burner
head and cap
Small burner
head and cap
Extra large burner
head and cap
General burner
31