Audio Note EL34 Manual page 34

Well done – that takes care of the output transformer primaries!
Copyright © 2006-2009 AudioNote Kits
www.AudioNoteKits.com
audionotekits@rogers.com
Strip the ends of the red and black twisted and then tin the
end of the wires.
Connect the wires to their corresponding Pin 3 on each
valve base.
Please stick to the color-coding so that the 2 channels don't
end up out of phase with each other!
Repeat the connection of the red black twisted from the
output transformers for the other channel.
For the next step, please refer to the General Wiring
Diagram in the Appendix.
Finally, collect up the two yellow wires
from the output transformer primary.
These wires will connect into the
power supply board – route them
along the transformers over to the
power supply board – check out the
pictures of the completed unit to see
the routing of the wires.
Connect the two yellow wires hook up
to the VDD_1A and VDD_1B on the
power supply board.
Page 34