LG LSN090HYV Product Data Book page 74

Installation
Outdoor
1. Remove the cover control from the unit by loosening
the screw.
Connect the wires to the terminals on the control
board individually as the following.
2. Secure the cable onto the control board with the
holder (clamper).
3. Re x the cover control to the original position with
the screw.
NOTICE
1. Separately wire power supply cord and connecting cable.
2. Use heat-proof electrical wiring capable of withstanding temperature up to 75°C(167°F).
3. Use outdoor and waterproof connection cable rated up to 300V for the connection between indoor and outdoor
unit. (For example, Type SJO-WA)
• Be sure to comply with local codes while running the wire from the indoor unit to the outdoor unit(size of wire
and wiring method, etc).
• Every wire must be connected rmly.
• No wire should be allowed to touch refrigerant tubing, the compressor or any moving parts.
Terminal block
Over 5mm
(0.2")
Tubing cover
Inverter Single
6RMI0-04C
Connecting
cable
Power
supply
cord
Conduit panel
73