LG LSN090HYV Product Data Book page 64

Installation
Fixing Installation Plate
The wall you select should be strong and solid enough to
prevent vibration
1. Mount the installation plate on the wall with
type "A" screws. If mounting the unit on a concrete wall,
use anchor bolts.
• Mount the installation plate horizontally by aligning the
centerline using Horizontal meter .
2. Measure the wall and mark the centerline. It is also important to use caution concerning the location of the
installation plate. Routing of the wiring to power outlets is through the walls typically. Drilling the hole through
the wall for piping connections must be done safely.
Type 1
Left rear piping
• Applied Model
: LS091HSV2/LS121HSV2/LA090HSV2/LA120HSV2
Type 2
Ø65(2 19/32)
Left rear
piping
• Applied Model
: LS181HSV2/LA180HSV2/LA240HSV2
Place a level on raised tab
Unit Outline
442(17 13/32)
Ø70(2 11/16)
133(5 3/16)
175(6 29/32)
Place a level on raised tab
Unit Outline
460(18 3/32)
Measuring Tape
69(2 11/16)
105(4 3/32)
Inverter Single
Chassis
Hook
442(17 13/32)
Installation Plate
570(22 13/32)
Installation Plate
Measuring Tape
Hanger
Installation Plate
Type "A" Screws
Ø70(2 11/16) Ø70(2.76 )
Right rear piping
95(3 11/16)
217(8 1/2)
[Unit : mm(inch)]
Ø65(2 19/32)
Right rear
piping
56(2 3/16)
207(8 3/32)
[Unit : mm(inch)]
6RMI0-04C
63