Black & Decker CS1835 Original Instructions Manual

Black & Decker CS1835 Original Instructions Manual

Hide thumbs Also See for CS1835:




Table of Contents

Summary of Contents for Black & Decker CS1835

  • Page 1 CS1835
  • Page 2 ENGLISH (Original instructions)
  • Page 3 (Original instructions) ENGLISH...
  • Page 6: Intended Use

    ENGLISH (Original instructions) Intended use 3. Personal safety Your BLACK+DECKER chainsaw has been designed for a. Stay alert, watch what you are doing and use common pruning and felling trees and cutting logs. This tool is intended sense when operating a power tool. Do not use a for consumer use only.
  • Page 7 (Original instructions) ENGLISH e. Maintain power tools. Check for misalignment or Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be binding of moving parts, breakage of parts and any whipped toward you or pull you off balance. other condition that may affect the power tools Carry the chain saw by the front handle with the chain operation.
  • Page 8: Additional Safety Instructions

    ENGLISH (Original instructions) Safety recommendations for the chainsaw Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular We strongly recommend that first time users obtain practi- breaks. cal instruction in the use of the chainsaw and protective Impairment of hearing.
  • Page 9 (Original instructions) ENGLISH Assembly Electrical safety This tool is double insulated; therefore no earth Warning! Always wear protective gloves when wire is required. Always check that the power working on your chainsaw. supply corresponds to the voltage on the rating plate.
  • Page 10 ENGLISH (Original instructions) Checking and adjusting the chain tension (fig. I) The tool is now ready to use. Before use and after every 10 minutes of use, you must check the chain tension. How the anti-kickback chain brake works Disconnect the tool from the mains supply In the event of kickback, your left hand comes in contact with the front guard, pushing it forwards, toward the workpiece, Lightly pull on the chain (5) as shown (inset fig.
  • Page 11: Troubleshooting

    (Original instructions) ENGLISH Do not attempt to fell trees where the tree diameter is When on a slope: greater than the cutting length of the chainsaw. Always stand on the uphill side. Cut a direction notch to determine the direction of fall. Make a horizontal cut to a depth of between 1/5th and When attempting to cut a log on the ground (fig.
  • Page 12: Maintenance

    ENGLISH (Original instructions) What to do if your chainsaw needs repair. Problem Possible cause Possible solution Your chainsaw is manufactured in accordance with the rel- evant safety requirements. Repairs should only be carried out Empty oil from tank and Chainsaw not us- Debris in tank by a qualified person using original spare parts otherwise this replace...
  • Page 13: Technical Data

    (Original instructions) ENGLISH Technical data EC declaration of conformity CS1835 (Type 1) MACHINERY DIRECTIVE Voltage 1800 OUTDOOR NOISE DIRECTIVE Power input 1800 Bar length Max bar length CS1835 Chain speed Black & Decker declares that these products described under (No-load) 12.5...
  • Page 14 ENGLISH (Original instructions) Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
  • Page 15 (Original instructions) ENGLISH 15 15...
  • Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...

Table of Contents